Extremely durable
With a tool life of 650 minutes, the RF 100 Sharp exceeds all expectations

650 minutes of tool life, 2560 cm³ chip volume, hardly any wear. Impossible? Of course not! With this result, the RF 100 Sharp solid carbide milling cutter from Gühring is exceeding the expectations of metal processor LB-Fertigungsservice GmbH from Schöneck. Even under unstable machining conditions, a single milling cutter can handle the entire job.

Liane Beinenz, Geschäftsführerin bei LB-Fertigungsservice und Fertigungsleiter Stefan Petermann

A great team: Liane Beinenz, Managing Director at LB-Fertigungsservice and Production Manager Stefan Petermann.

Founded in 2005, LB-Fertigungsservice GmbH’s core skill lies in manufacturing sophisticated mechanical components. In addition to qualified series production, the family-owned company specialises primarily in the production of individual parts. Be it samples, prototypes or niche products – LB Fertigungsservice also has to meet project requirements in economic terms at all times. “Individual parts are our business. Our hallmark is our speed in manufacturing. Then the order has to work,” explains production manager Stefan Petermann. “If we have any questions, we need an answer quickly. And we can count on that with Gühring.”

The task: Lots of milling with a lot of vibration

Die Fertigungsmaschine bei der Firma LB-Fertigungsservice

One order presented some major challenges to the company LB Fertigungsservice: A total of four components needed to be manufactured, which would later be used in textile production. The blank was to be machined from two sides. And two deep steps needed to be milled on each side.

But in addition to the depth of the steps, the machine intended for this purpose posed a particular challenge for the contract manufacturer from Altenstadt: The machine with SK40 has been in use at LB-Fertigungsservice for 18 years – and placed high demands on the tool due to the unstable machining conditions.

A clear case for the shark

Die Herausforderung liegt auf der Hand: eine anspruchsvolle Fräsbearbeitung unter instabilen Maschinenbedingungen. Für Außendienstmitarbeiter Walter Wolf ist klar: „Hier haben wir nur mit der langen Ausführung des RF 100 Sharp eine Chance.“

Fertigungsleiter Stefan Petermann und der Gühring-Außendienstmitarbeiter

Stefan Petermann (LB-Fertigungsservice, left) and Walter Wolf (Gühring) are impressed by the performance of the RF 100 Sharp.

It quickly became clear: A good metal removal rate and high process reliability are essential to meet the eco-nomic efficiency requirements. For Gühring employee Walter Wolf, it is clear: “The long design of the RF 100 Sharp – the sharpest of all milling cutters – is our only chance here.” The length of the milling cutter is decisive for the deep step to be milled into the component.

In addition to the star milling cutter, the RF 100 Diver, the customer already uses the RF 100 Speed. “The Speed is also available in a long design, but has a lower rake angle compared to the Sharp. This tool would have built up too much pressure on this machine – that would not have worked,” says Wolf. With his recommendation, Wolf hit the mark. Thanks to its high rake angle and very sharp cutting edges, the RF 100 Sharp exceeds all expectations.

After 3.5 components and a tool life of 574 minutes, Petermann and Wolf checked the milling cutter. And found almost no signs of wear. And not even the completion of the fourth and final component was affected by this – there was no sign of any micro chipping or corner chipping. The result: The milling cutter achieved a tool life of 650 minutes with an impressive metal removal rate of 2560 cm³ – in spite of the tool’s enormous overhang and the poor machine conditions. The RF 100 Sharp thus exceeded all the customer’s expectations: “We ordered a total of four milling cutters for the order – one tool per component. In the end, we were able to complete the entire order with just one tool,” Petermann says happily.

Gühring’s sharpest milling cutter

How did the RF 100 Sharp achieve this? Thanks to its product properties, the new Gühring product is particularly well-suited for machining soft, tough and high-alloyed materials. With a rake angle of 12 degrees, the solid carbide tool cuts powerfully and smoothly through challenging materials – and ensures exceptionally easy cutting.

Another major advantage that benefits LB-Fertigungsservice GmbH in particular: The RF 100 Sharp stands out with its strong performance in all operating conditions. Even on unstable machines. Thanks to the tough carbide, tool breakage is prevented even under very unstable machining conditions. The optimised facet cut dampens vibrations and increases running smoothness and tool life, while the corner protection chamfer ensures maximum stability and edge strength. Wear is also reduced by the AlCrN coating developed by Gühring. The solid carbide milling cutter RF 100 Sharp extends the Gühring portfolio as the first milling cutter in an extra-long design.

RF 100 Sharp in the online shop

In contrast to the standard milling cutter, this variant features a longer cutting edge, but is based on “long (DIN)”. For even greater depths, the RF 100 Sharp is available as a mid-length design, which has been designed so that the cutting edge accounts for more than 50% of the reach. This means that the sharpest milling cutter from Gühring to date offers the right length for every application. An advantage that LB-Fertigungsservice GmbH was able to benefit from in this case.

Gühring: More than just a tool manufacturer

For Petermann, one thing is certain: The three remaining milling cutters are still coming in useful. After all, new challenges require new tools for the company to remain competitive. “We have 30 years of milling experience, but there’s always so many new developments. If you stay in the same place, nothing will get any better,” he explains. With Gühring, he has found a partner who not only sells tools, but also shares valuable expertise. These are the best conditions for continuing to master common challenges quickly and efficiently.

Have we piqued your interest?

More information about the RF 100 Sharp:

RF 100 Sharp

Then arrange your personal consultation appointment now:

Rolf Ehrler
Product Manager Milling and Deburring Tools

+49 172 65 705 32
rolf.ehrler@guehring.de

Technical advice and support are also available quickly and directly via our service hotline 00800 2607 2607.
We can also be reached on WhatsApp: +49 172 658 53 53. Save the number!

Solid carbide circular milling cutter for smooth grooving

27.09.2025 | Milling, Products

Gühring is adding a powerful solid carbide circular milling cutter to its grooving tool range. The tool not only scores with perfect surface qualities and long tool lives, but also impresses with significantly smoother running compared to the competition. For maximum cost-effectiveness when milling slots and internal contours.

3 experts in stainless steels

22.08.2024 | Milling, Products, Threading

With the new high-performance tools for stainless steel machining, Gühring offers the optimal solution. Special coatings and adapted geometries guarantee the highest cutting values and extended service life. This means that the most demanding machining tasks can be mastered in a wide range of industries.

Micro-precision milling cutter impresses in ISO-N materials

22.08.2024 | Company news, Events, Micro tools, Milling, Products

The RF 100 AL Micro offers an outstanding combination of precision, efficiency and process reliability, making it the first choice when machining aluminium, copper and brass. With its innovative properties this tool raises the bar for micro-machining.

Extremely durable With a tool life of 650 minutes, the RF 100 Sharp exceeds all expectations